With Paessler SNMP Tester you can run simple SNMP
requests against a device in your network. During the
test each single step of the SNMP request is logged
into a logfile for analysis. The idea of this free
program is to debug SNMP requests down to the protocol
level in order to find communication and/or data
problems in SNMP monitoring configurations.

Just follow these simple instructions:

1) Download Paessler SNMP Tester and run the
snmptest.exe file.

2) Enter the IP address of your device and select the
SNMP port and the SNMP community string.

3) Select a request type:
(a) MIB2 Interface: Reads the traffic counter of a
port according to the MIB2 OID
(b) Custom OID: Enter a custom OID value to access any
OID value on the device
(c) Device Uptime: Reads the standard system uptime
value from the device

4) It may be necessary to select a specific local IP
for the SNMP request (usually only necessary for multi
homed systems)

5) Click on "Run Test" to start the testing process.

6) During the test you will find detailed information
in the logfile window.

Download (1072 KB) Website Link to this page