|
|
RAID Reconstructor
-
Version
2.31
Recover data from a broken RAID Level 5 or 0 Array.
Runtime's RAID Reconstructor will help you to recover
data from a broken RAID Level 5 Array consisting of 3
to 14 drives, RAID Level 0 Array (Striping) consisting
of 2 drives.
Even if you do not know the RAID parameters, such as
drive order, block size and direction of rotation, RAID
Reconstructor will analyze your drives and determine
the correct values. You will then be able to create a
copy of the reconstructed RAID in an image file or on a
physical drive.
Once you created an image you can use it for further
data recovery processing with Runtime's GetDataBack. If
you create the image on another physical drive, you can
process it with GetDataBack too or you might even be
able to directly boot from it.
RAID Reconstructor is read-only. It will not try to
"fix" your RAID. It will merely create a copy of your
RAID at another location. It will collect sector by
sector from each single drive involved and write these
sectors in the correct order to the designated
destination. This process is also called "de-striping".
Because one drive is redundant in RAID 5, it is
sufficient to have one less than the original number of
drives (N) in the array. RAID Reconstructor can
recalculate the original data from the N-1 drives. For
a RAID-0 (striped) array you will need both drives.
The RAID Reconstructor will recover both, hardware and
software RAIDs. It will recover from broken Windows
Dynamic Disk sets.
|